<feed xmlns='http://www.w3.org/2005/Atom'>
<title>claude-plugins-official.git/plugins/code-modernization/tests/register.test.ts, branch add-plugin/xcode</title>
<subtitle>Official Claude Code plugin directory
</subtitle>
<link rel='alternate' type='text/html' href='https://git.1991861.xyz/claude-plugins-official.git/'/>
<entry>
<title>code-modernization: rename the pane's rule review command to /modernize-review-pane</title>
<updated>2026-09-25T18:28:51+00:00</updated>
<author>
<name>Morgan Lunt</name>
<email>morganl@anthropic.com</email>
</author>
<published>2026-09-25T18:28:51+00:00</published>
<link rel='alternate' type='text/html' href='https://git.1991861.xyz/claude-plugins-official.git/commit/?id=28abd83ad92c24a4107803bd03e510387f2014c2'/>
<id>28abd83ad92c24a4107803bd03e510387f2014c2</id>
<content type='text'>
The pane's bare /modernize-review took the name of the plugin's own review command, so typing the short form in a pane-enabled session opened the pane's cards instead of the pop-up review. The pane's version is now /modernize-review-pane, and /modernize-review always runs the plugin command. Both still write the same review file.
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
The pane's bare /modernize-review took the name of the plugin's own review command, so typing the short form in a pane-enabled session opened the pane's cards instead of the pop-up review. The pane's version is now /modernize-review-pane, and /modernize-review always runs the plugin command. Both still write the same review file.
</pre>
</div>
</content>
</entry>
<entry>
<title>code-modernization: pane wording, attention items and docs that match the code</title>
<updated>2026-09-25T04:07:24+00:00</updated>
<author>
<name>Morgan Lunt</name>
<email>morganl@anthropic.com</email>
</author>
<published>2026-09-25T04:07:24+00:00</published>
<link rel='alternate' type='text/html' href='https://git.1991861.xyz/claude-plugins-official.git/commit/?id=caac6735d95bddeb8c8bbe3ddc9d6c01787fc8e1'/>
<id>caac6735d95bddeb8c8bbe3ddc9d6c01787fc8e1</id>
<content type='text'>
The pane's button reads "put in prompt" (it never runs the command), the
refresh button is gone (the pane already refreshes after writes, at turn end
and every 20 seconds while idle), the summary line fits a 120-column bar, and
the next-step reasons are short enough to read. A P0 rule under discussion is
listed under Attention ("the build waits"), and a module that is not proven
shows its first reason there. In an uplift, finished modules list before
merely edited ones.

hooks/README.md now names every button and label as the code does, documents
the plugin's /code-modernization:modernize-review command (which writes the
same ledger for people without the pane) and how it differs from the pane's
own /modernize-review, and says which pictures use sample text. 141 engine
tests pass and the type check is clean.
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
The pane's button reads "put in prompt" (it never runs the command), the
refresh button is gone (the pane already refreshes after writes, at turn end
and every 20 seconds while idle), the summary line fits a 120-column bar, and
the next-step reasons are short enough to read. A P0 rule under discussion is
listed under Attention ("the build waits"), and a module that is not proven
shows its first reason there. In an uplift, finished modules list before
merely edited ones.

hooks/README.md now names every button and label as the code does, documents
the plugin's /code-modernization:modernize-review command (which writes the
same ledger for people without the pane) and how it differs from the pane's
own /modernize-review, and says which pictures use sample text. 141 engine
tests pass and the type check is clean.
</pre>
</div>
</content>
</entry>
<entry>
<title>code-modernization: make the live pane work below 144 columns and show the proof</title>
<updated>2026-09-25T03:52:27+00:00</updated>
<author>
<name>Morgan Lunt</name>
<email>morganl@anthropic.com</email>
</author>
<published>2026-09-25T03:52:27+00:00</published>
<link rel='alternate' type='text/html' href='https://git.1991861.xyz/claude-plugins-official.git/commit/?id=51b1ae9e20486d62b839ed9f37e1cfc7d55bf85c'/>
<id>51b1ae9e20486d62b839ed9f37e1cfc7d55bf85c</id>
<content type='text'>
Found by exercising the pane against the real outputs of finished runs:

- Below 144 columns the engine holds an unasked pane back; the pane ignored
  that, so it drew no pane, no show bar, and the panel command "hid" a pane
  that was never there.
- A symlinked legacy/&lt;name&gt; lists as another kind of entry, so the source
  link that preflight now creates was never recognized as a system.
- Uplift and reimagine next steps were placeholders with no button.
- The refresh debounce was starved while agents ran, so the map froze.
- Hostile lines in the brief, rules and baseline could take seconds to match;
  lines are now capped. The rule-review ledger is validated on read and
  merged on save, and keeps a reviewer's note.
- A baseline with no row read as "the baseline had 0"; one-module baseline
  totals now count as that module's row.

New: a verdict chip with words on every built module, a verify-first next
step, and a readable palette that follows the terminal theme. 140 engine
tests pass and the type check is clean.
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Found by exercising the pane against the real outputs of finished runs:

- Below 144 columns the engine holds an unasked pane back; the pane ignored
  that, so it drew no pane, no show bar, and the panel command "hid" a pane
  that was never there.
- A symlinked legacy/&lt;name&gt; lists as another kind of entry, so the source
  link that preflight now creates was never recognized as a system.
- Uplift and reimagine next steps were placeholders with no button.
- The refresh debounce was starved while agents ran, so the map froze.
- Hostile lines in the brief, rules and baseline could take seconds to match;
  lines are now capped. The rule-review ledger is validated on read and
  merged on save, and keeps a reviewer's note.
- A baseline with no row read as "the baseline had 0"; one-module baseline
  totals now count as that module's row.

New: a verdict chip with words on every built module, a verify-first next
step, and a readable palette that follows the terminal theme. 140 engine
tests pass and the type check is clean.
</pre>
</div>
</content>
</entry>
<entry>
<title>code-modernization: mark the pane's notes as data and clean the names in them</title>
<updated>2026-09-25T01:19:16+00:00</updated>
<author>
<name>Morgan Lunt</name>
<email>morganl@anthropic.com</email>
</author>
<published>2026-09-25T01:19:16+00:00</published>
<link rel='alternate' type='text/html' href='https://git.1991861.xyz/claude-plugins-official.git/commit/?id=54772aaaabf371dc212480fbf7da216bd65990c7'/>
<id>54772aaaabf371dc212480fbf7da216bd65990c7</id>
<content type='text'>
The pane adds two kinds of text to what the model reads: a note about the
file it just read (names, rule titles and delta ids from the analysis
files) and a one-line state. Those names were written by analysis agents
from the legacy code, so a hostile comment could reach the model through
them.

Each such value is now cut to one short plain line: control, invisible
and bidirectional characters, backticks, angle and square brackets and
double quotes are replaced, and long values are trimmed. A note opens by
saying its contents are data, never instructions, and closes with an end
line no value can forge. The state line says it is a status line and not
an instruction, and the next-step command names a module only when the
module id is one plain token. The pane lists only system directories
whose names the plugin's workflows accept.
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
The pane adds two kinds of text to what the model reads: a note about the
file it just read (names, rule titles and delta ids from the analysis
files) and a one-line state. Those names were written by analysis agents
from the legacy code, so a hostile comment could reach the model through
them.

Each such value is now cut to one short plain line: control, invisible
and bidirectional characters, backticks, angle and square brackets and
double quotes are replaced, and long values are trimmed. A note opens by
saying its contents are data, never instructions, and closes with an end
line no value can forge. The state line says it is a status line and not
an instruction, and the next-step command names a module only when the
module id is one plain token. The pane lists only system directories
whose names the plugin's workflows accept.
</pre>
</div>
</content>
</entry>
<entry>
<title>code-modernization: add an optional live progress pane</title>
<updated>2026-09-25T01:11:07+00:00</updated>
<author>
<name>Morgan Lunt</name>
<email>morganl@anthropic.com</email>
</author>
<published>2026-09-25T01:07:14+00:00</published>
<link rel='alternate' type='text/html' href='https://git.1991861.xyz/claude-plugins-official.git/commit/?id=c9e990089c6c87cb96e227e998edbada1df82861'/>
<id>c9e990089c6c87cb96e227e998edbada1df82861</id>
<content type='text'>
Adds a hooks module, off unless the CLI's early-access function hooks
are enabled, that draws a pane beside the transcript while the commands
run: the system, which steps are done, a map of its code, each unit of
work and where it stands, what needs attention, and the next command.

It reads only the artifacts the commands write and the legacy tree, so
it works for any language and for a rewrite, a same-stack uplift or a
greenfield rebuild. The map comes from topology.json when there is one
and from the source tree when there is not. In an uplift each module is
set against the baseline; tests are read from JUnit XML, .trx reports or
the runs a session sees; a button shows and hides the pane, and
/modernize-panel does the same from the keyboard.

The same module adds x-ray context on legacy reads, a review deck for
business rules (/modernize-review), a sign-off dialog (/modernize-sign)
and a fleet view that spots one failure repeating across agents. It
only watches: it never blocks, rewrites or restores an edit, and it runs
no program inside the trees it reads. An uplift's changed modules are
found by comparing the working copy with the tree by file name and size
through the file API. Its options are the plugin's userConfig. Without
the flag nothing loads and the commands, agents and workflows behave as
before.

91 tests in tests/ run with "claude plugin test"; plugin validate
passes on the release build with the flag on and off.
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Adds a hooks module, off unless the CLI's early-access function hooks
are enabled, that draws a pane beside the transcript while the commands
run: the system, which steps are done, a map of its code, each unit of
work and where it stands, what needs attention, and the next command.

It reads only the artifacts the commands write and the legacy tree, so
it works for any language and for a rewrite, a same-stack uplift or a
greenfield rebuild. The map comes from topology.json when there is one
and from the source tree when there is not. In an uplift each module is
set against the baseline; tests are read from JUnit XML, .trx reports or
the runs a session sees; a button shows and hides the pane, and
/modernize-panel does the same from the keyboard.

The same module adds x-ray context on legacy reads, a review deck for
business rules (/modernize-review), a sign-off dialog (/modernize-sign)
and a fleet view that spots one failure repeating across agents. It
only watches: it never blocks, rewrites or restores an edit, and it runs
no program inside the trees it reads. An uplift's changed modules are
found by comparing the working copy with the tree by file name and size
through the file API. Its options are the plugin's userConfig. Without
the flag nothing loads and the commands, agents and workflows behave as
before.

91 tests in tests/ run with "claude plugin test"; plugin validate
passes on the release build with the flag on and off.
</pre>
</div>
</content>
</entry>
</feed>
